PCB and stencil manufacturing capabilities
Glodely works integrated with China’s leading PCB manufacturers.
The values on this page are limited to the options the configurator offers.
The PCB values are for rigid FR-4 boards; other materials are in the configurator.
Values read on 7 October 2026
PCB (rigid FR-4)
| Feature | Value | Note |
|---|---|---|
| Layer count | 1–32 layers | |
| Board thickness | 0.4–4.5 mm | 2.5 mm and over from 12 layers |
| Thickness tolerance | ±10% from 1 mm | ±0.1 mm below 1 mm |
| Outer layer copper | 1 / 2 oz | Also 2.5 / 3.5 / 4.5 oz on two layers |
| Inner layer copper | 0.5 / 1 / 2 oz | On four layers and more |
| Minimum trace and space, 1 oz | 0.1 mm | 0.09 mm on multilayer boards |
| Minimum trace and space, 2 oz | 0.16 mm | 0.15 mm on multilayer boards |
| Minimum trace and space, 2.5 / 3.5 / 4.5 oz | 0.2 / 0.25 / 0.3 mm | Two layers only |
| Drill diameter | 0.15–6.3 mm | From 0.3 mm on one layer; larger holes are routed |
| Minimum via, hole and diameter | 0.15 / 0.25 mm | 0.1 / 0.2 mm up to 1 mm, ENIG or OSP |
| Minimum non-plated hole | 0.5 mm | |
| Maximum board size | 670 × 600 mm (two layers) | One layer 606 × 510 · four layers 663 × 593 · six and more 656 × 586 mm |
| Maximum size, thin boards | 599 × 497 mm | Boards under 0.8 mm |
| Minimum board size | 3 × 3 mm | Boards of 0.6 mm and thicker |
| Solder mask colour | Green, red, yellow, blue, white, black and purple | |
| Surface finish | Leaded HASL, lead-free HASL, ENIG and OSP | No HASL from 6 layers or at 0.4 mm; no leaded HASL at 0.6 mm |
| Board thickness with leaded HASL | 0.8–2 mm (two layers) | One layer 1–1.6 · four layers 1–2 mm |
| Minimum quantity | 5 boards |
SMD stencil
| Feature | Value | Note |
|---|---|---|
| Framed sheet | 400 × 300 – 1500 × 500 mm | Usable area 240 × 140 – 1300 × 320 mm |
| Frameless sheet | 380 × 280 – 700 × 600 mm | Usable area up to 650 × 580 mm |
| Custom size | Frameless sheets only | Within a 650 × 580 mm usable area |
| Side | Top · Bottom · Top and bottom on one sheet · Top and bottom on separate sheets | |
| Minimum aperture | Over 0.08 mm |